3D Auto Alignment feature maintains XYZ alignment even during small eye movements, providing consistent and repeatable measurements.* An operator follows the alignment guidance on the monitor for initial alignment, and then alignment and measurement start automatically. 3D Auto Alignment function supports easy operation.

Wide 8.5-inch Touchscreen Control Panel

The new CT-800A is equipped with a wide 8.5 inch color touchscreen panel featuring clear, easy to read icons allowing the operator full control of the unit during the measurement process.

Soft Air Puff

Software controls the optimal amount of air required for every measurement on each individual eye. A soft air puff means less stress on the eye, resulting in an improved patient experience.

IOL MODE

Adjusted Tono value*

The CT-800A is able to calculate Adjusted Tono Value from measured IOP to manually inputing the corneal thickness value measured by other devices such as a pachymeter.
^* Adjusted Tono Value is reference value

Easy to follow guidance

Follow the initial alignment guidance to position the instrument, then the Auto Alignment and measurement feature will take over.

Print data sample

Topcon’s ability to engineer a weight reduction of approximately 22 % has contributed to a smoother operation of the unit when using the X-Y control lever. The up/down movement has also been motorized. This all contributes to a more fluid measuring process and a more accurate end result.

Wide 8.5-inch Touchscreen Control Panel

The new CT-800 is equipped with a wide 8.5 inch color touchscreen panel featuring clear, easy to read icons allowing the operator full control of the unit during the measurement process.

Soft Air Puff

Software controls the optimal amount of air required for every measurement for each individual eye. A soft air puff means less stress on the eye, resulting in an improved patient experience.

IOL MODE

The IOL mode allows you to measure the eye with an IOL.

Adjusted Tono value*

The CT-800 is able to calculate Adjusted Tono Value from measured IOP to manually input the corneal thickness value measured by other devices such as a pachymeter.
^* Adjusted Tono Value is reference value

This unique 4 in 1 instrument is ideal for busy and the most modest of screening rooms. The TRK-2P is not only smaller than its predecessor, but the result of such unique combination of 4 instruments in 1 means that only one instrument is needed for all your pretest requirements. It saves the half space than Auto-Refractometer, Keratometer, Non-Contact Tonometer. For the patient, travelling from one station to another is no longer required.

Fully Automated Measurement

The TRK-2P is fully automated and both eyes can be measured during one sitting, gathering valuable information accurately and quickly. Such efficient operation results in less discomfort to the patient and a speedy examination.

Flexible and Space Saving Layout

The rotating touch screen control panel enables for the instrument to be positioned against the wall; in the corner of the room or in the classic forward facing way. It optimizes further the room space than keeping the facing position. The operator also has flexibility to be behind the patient to offer support when needed.

Easy-to-Use 8.5 inch color touch panel monitor

The large monitor is very multifunctional, including: manual alignment control panel; manual shooting button; and an easy to see display of live anterior image during the measurement. Each measurement mode is clearly displayed with icons and actions for ring image, pupil diameter, results and menu settings are all extremely easy to use.

Accurate and reliable refractive measurements

With Topcon’s exclusive Rotary Prism Technology, the TRK-2P provides unmatched accuracy and reliability. The innovative optical design incorporated into the TRK-2P allows for accurate and reliable measurements with a pupil as small as φ2mm

Simple and Quick Operation

• R/L fully automated measurement
• Easy-to-Use Touch Screen Control Panel eliminates the need for control lever

Additional Measurement Mode

The additional measurement mode will save time and prevent extra work & inconvenience. The CT-1/1P will continue to measure until the required preset IOP measurement count is obtained.
Ex.) In this case, the preset count is 3 times.

Easy-to-Use Color Touch screen Control Panel

AII operating procedures can be performed with the touch screen control panel. The sophisticated buttons provide an intuitive operator experience. The CT-1/1P automatically takes measurement of the right and left eyes quickly and easily.

Flexible Layout and Space Saving Layout

The adjustable control panel allows the operator to position him or herself anywhere around a patient since the control panel can be faced in a number of directions. In addition, the compact body enables the operator to support the patient easily from many different positions during the measurement even when the patient’s eyelid needs to be opened. These unique features will contribute to a space saving and flexible layout in your eye examination room, especially if combined with the Topcon KR-1 Auto Kerato-Refractometer.

Layout Ex. 1

When the KR-1 and CT-1/1P are positioned at 90 degrees, an operator and a patient have to turn just 90 degrees to complete both measurements.

Built in Printer

The CT-1/1P is equipped with a built-in thermal printer that can be easily loaded with a roll of paper. The CT 1/1P cuts the paper automatically at the end of printing.